Disassembly And Assembly Instructions - Panasonic SC-HTB10P Service Manual

8 Disassembly and Assembly Instructions

Caution Note:
• This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo-
nents for the unit. (You may refer to the section of "Main components and P.C.B Locations" as described in the service
manual)
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with
sharp edges.
• Avoid touching heatsinks due to its high temperature after prolong use. (See caution as described below)
• During disassembly and assembly, please ensure proper service tools, equipments or jigs is being used.
• During replacement of component parts, please refer to the section of "Replacement Parts List" as described in the
service manual.
• Select items from the following indexes when disassembly or replacement are required.
• Disassembly of Back Cabinet Assembly
• Disassembly of Front Speaker L (SP1)
• Disassembly of Front Speaker R (SP2)
• Disassembly of Subwoofer Speaker Front (SP3)
• Disassembly of Subwoofer Speaker Rear (SP4)
• Disassembly of Main Chassis Assembly
• Disassembly of LED P.C.B. and Panel Tact Switch P.C.B.
• Disassembly of AC Inlet P.C.B.
• Disassembly of Main P.C.B.
• Disassembly of SMPS P.C.B.
• Replacement of Switch Regulator IC (IC5701)
• Replacement of Rectifier Diode (D5802)
• Disassembly of HDMI P.C.B.
18