Special Mode Setting
Service Mode Table 1
1) Unit power-up
2) FL shows "Hello" then "goodbye"
3) Unit power button
4) Unplug & plug AC Cord
The audiovisual level setting password is ini-
Setting every kind of modes for servicing.
*Details are described in
BD-ROM history cleaning < Persistent Storage> of BD-ROM standard is
Screen display: [The player's history data has
been cleared] is displayed for five seconds.
Forced disc eject
Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
When the power button is not effective while
power is ON, turn off the power forcibly.
Perform sequence of modes as * Aging
Description shown below continually.
ll the main unit's parameters are initialized.
7.3.1. Service Mode
Same display as before ex ecution.
Display in P-off mode.
Display following the mode.
Press [STOP], [SKIP FWD] and
neously for five seconds when
power is off.
Open the tray, and press [SKIP
REV] on remote control, follow by
[PLAY] simultaneously for 5
When the power is off, press [SKIP
on remote control
When disc is not in tray. press
[STOP] and [POWER] keys simulta-
neously for 5 seconds.
When power on press [STOP] on
main unit & [POWER] on remote
When power is off, press [SKIP] &
[OPEN/CLOSE] keys simulta-
neously for 5 seconds or more.
Press [POWER] key over than 10
When the power is ON, press
[SKIP FW], [PLAY] & [OPEN/
CLOSE] simultaneously for over
seconds and less than 10 seconds.
If Unit has not turned into Aging
mode by operations shown above,
execute TEST MODE once and re-
execute operation shown above.
(*All the main unit s parameters
include tuner are initialized by TEST
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and re-exe-
cute this command.
*When releasing Aging mode, press
[POWER] key over 10 seconds.