Service Mode Table (Wireless - e.g. SH-FX70)
By pressing various button combinations on the player and remote control unit, you can activate the various service modes for
Service Mode Table 1
To set the ID in the Tx & Rx. The
system goes into "Pairing Mode".
[P] will be displayed to indicate
it is in "Pairing Mode".
During this condition, the "ID set"
button on the receiver unit can be
pressed to pair the Tx & Rx.
After 60 seconds, the FL display will
return to its previous display.
Note: Carry out pairing when Tx or Rx
has been changed.
will blink when a new
transmitter card is inserted or when the
Receiver module P.C.B.(Rx) had been
It will stopped when pairing is completed.
Press and hold [FAST
FORWARD] button on the
main unit, and  button
on the remote control unit.
unit or remote control.