Download  Print this page

Panasonic SA-BT300PX Service Manual Page 25

Blu-ray disc home theater sound system.
Hide thumbs

Advertisement

7.1.2.
Error Code Table 2
Error Code
Diagnosis contents
SELF
Restoration operation
CHECK
PLEASE
Unit is in termination process
WAIT
UNFOR-
Unformatted disc error
MAT
No PLAY
When there is a viewing restric-
tion on a BD-Video or DVD-
Video.
7.1.3.
Power Supply & Digital Amplifier Error Code Table
Error
Diagnosis Contents
Code
F61 The abnormalities
in an output or power
supply circuit of
POWER AMP
F76
F76
Abnormality in the
output voltage of
stabilized power
supply
H19
Fan Module
Description
Since the power cord fell out during a power
failure or operation, it is under restoration
operation.
*It will OK, if a display disappears automati-
cally. If a display does not disappear, there is
the possibility that defective Digital P.C.B. /
DVD drive.
Unit is in termination process now.
BYE
is displayed and power will be turned off.
You have inserted an unformatted DVD-RAM
or DVD-RW that is unformatted or recorded
on other equipment.
Rating password is set.
Description of error
In normal operation, when DCDET2 goes
to "L" (Low) (Not during POWER OFF
condition), F61 appears on FLDisplay
for 1 second and PCONT goes to
"L" (Low).This is due to speaker output
has DC voltage or fan is not working.
In normal operation when DCDET1 is
detected "L" (Low) for two consecutive
times, F76 is displayed on FL for
1 second and after that PCONT will be
turned to "L" (Low). This is due to any of
the DC voltages (+9V, +7V, -7V, +5V,
+5.3V etc.) C22 not available.
Fan Module is not operating properly
Monitor Display
No display
No display
The disc is not
formatted properly.
No display
Automatic FL Display
25
Automatic FL display
SELF CHECK
PLEASE WAIT
The character indication flows
sideways.
UNFORMAT
No PLAY
Remarks
Press [
STOP] on main
unit for next error.
Press [
STOP] on main
unit for next error.
Press [
STOP] on main
unit for next error.

Advertisement

Table of Contents

   Related Manuals for Panasonic SA-BT300PX

Comments to this Manuals

Symbols: 0
Latest comments: