Step 3 Remove 4 screws at BD Drive.
Step 4 Remove BD Drive.
Caution: During fixing 18P FFC to BD Drive, ensure that
non-wooven tapes are properly pasted over 18P FFC onto
9.13. Disassembly of Main P.C.B.
• Follow (Step 1) to (Step 3) of Item 9.3.
Step 1 Remove 1 screw at the rear panel.
Step 2 Remove 2 screws on Main P.C.B..
Caution: During assembling, ensure that the Main P.C.B. is
seated properly on Main P.C.B. angles.
Step 3 Detach 10P FFC at the connector (CN801) on Main
Step 4 Detach 18P FFC at the connector (CN802) on Main
Step 5 Detach 22P FFC at connector (CN503) on Main P.C.B..
Step 6 Detach 14P FFC at connector (CN1101) on Main P.C.B..
Step 7 Detach 7P FFC at connector (CN501) on Main P.C.B..
Step 8 Detach 20P FFC at connector (CN806) on Main P.C.B..