Disassembly Of Setup Mic P.c.b - Panasonic SA-BT300PX Service Manual

Step 4 Remove earth spring on Panel P.C.B..
Step 5 Remove USB earth spring on Panel P.C.B..
Caution: Keep both earth spring & USB earth spring in safe
place for assembling.
Step 6 Release 2 catches on Panel P.C.B..
Step 7 Remove Panel P.C.B..
Caution: During assembling, ensure that Panel P.C.B. is
properly located & fully catched onto front panel.
Step 8 Remove 2 screws on the Power Button P.C.B..
Step 9 Remove 1 screw on coil barrier.
Step 10 Remove coil barrier.
Step 11 Remove Power Button P.C.B..
Caution: During assembling, ensure that 3P wire is well
inserted into the three U-Slot ribs.
9.8. Disassembly
P.C.B.
• Follow (Step 1) to (Step 3) of Item 9.3.
• Follow (Step 1) to (Step 8) of Item 9.6.
• Follow (Step 1) to (Step 7) of Item 9.7.
Step 1 Remove Setup Mic P.C.B..
43
of Setup Mic