Disassembly Of Front Panel Assembly - Panasonic SA-BT300PX Service Manual

Step 4 Remove 1 screw on Wireless Adapter P.C.B..
Step 5 Release 1 locator of wireless barrier.
Step 6 Slightly slide wireless barrier in the direction of arrow.
Step 7 Detach the wireless barrier.
Step 8 Remove wireless barrier.
Step 9 Detach 3P cable at the connector (CN8505) on D-Amp
P.C.B.
Step 10 Release the tab of each side of rear panel in the direc-
tion of arrow.
Step 11 Remove the rear panel.
9.6. Disassembly of Front Panel
Assembly
• Follow (Step 1) to (Step 3) of Item 9.3.
Step 1 Release tabs at bottom of the front panel assembly.
Caution: Do not exert strong force when releasing the tabs.
During assembling, ensure that the tabs are fully catched
onto bottom chassis.
Step 2 Detach 14P FFC at the connector (CN1101) on Main
P.C.B..
Step 3 Detach 7P FFC at the connector (CN501) on Main
P.C.B..
Step 4 Detach 20P FFC at the connector (CN806) on Main
P.C.B..
Step 5 Release tabs at each side of the front panel assembly
on the direction of arrow.
41