9.9.
Disassembly of SD P.C.B.
• Follow (Step 1) to (Step 3) of Item 9.3.
• Follow (Step 1) to (Step 8) of Item 9.6.
Step 1 Desolder ground wire.
Caution: During assembling, solder back the ground wire.
Step 2 Remove 2 screws on SD support P.C.B..
Step 3 Remove SD P.C.B. with SD support P.C.B..
Step 4 Release 2 catches on SD P.C.B..
Step 5 Remove SD P.C.B..
9.10. Disassembly of Tray Lid
• Follow (Step 1) to (Step 3) of Item 9.3.
• Follow (Step 1) to (Step 9) of Item 9.6.
Step 1 Release Shaft B of tray lid from hole B.
Caution: During assembling, ensure that Shaft B of tray lid
is fully inserted into front panel.
Page 44