Saving To Flash Memory; Checking The Software Version - Omron F150-2 Operation Manual

Saving to Flash Memory

3-9-7

Checking the Software Version

Use the following procedure to check the Vision Sensor model
and the software system version.
Procedure
3-10

Saving to Flash Memory

Use the following memory to save set data to flash memory.
Flash memory data is loaded each time the F150 is started up.
Therefore, when settings have been changed, be sure to save to
flash memory before turning the power OFF. If the power is
turned OFF without saving, all of the setting changes will be lost.
Procedure
1
Go to SYS/Version.
2
Select OK to exit this screen.
1
Display the basic screen.
Section
Model number is displayed.
Software version and date
of creation are displayed.
3-10
61