Table of Contents
Advertisement
8.0 BACKLIGHT CONTROL
•
The backlight of the LCD can be set to be ON full time, ON only
when a weight is on the scale or turned to OFF.
•
To set the backlight press and hold the [PST] key for 4 seconds.
•
The weight display will show "EL xx" where xx is the current setting for
the backlight.
•
Enter a value of 1, 2 or 3 to set the parameter.
•
Press [1], "EL AU" sets the backlight to operate automatically when a
weight is placed on the scale or a key is pressed.
•
Press [2], "EL Off" sets the backlight to be OFF.
•
Press [3], "EL on" sets the backlight to be ON at all times.
•
Press the [Tare] key to store the value or press the [Zero] key to
escape from this setting and return to weighing.
9.0 RS-232 OUTPUT
The CFC series of scales can be ordered with an optional RS-232 interface.
Specifications:
RS-232 output of weighing data
ASCII code
4800 Baud (600-9600 selectable)
8 data bits (8 data bits no parity, 7 data bits even and odd parity selectable)
No Parity
Connectors:
9 pin d-subminiature socket
Pin 2 Input
Pin 3 Output
Pin 5 Signal Ground
@Adam Equipment Company 2005
17
Advertisement
Table of Contents
