Table of Contents
Advertisement
3.8
BACKLIGHT OPERATION
The backlight may be enabled or disabled by the user. If the
backlight is disabled battery life will be maximised. With the
backlight in operation the battery life will be less, depending upon
the extent at which the scale is used.
To enable the backlight
• Press and hold the Auto Clear key for 4 seconds.
• Press the [PLU4] key to change the operation:
"EL" "
"EL" "
"EL" " oFF" Backlight turned off.
• Press [Tare] to store the setting.
Backlight operation
When the backlight is set from automatic control-
• It will only turn on when the scale is being used.
• It will be on when a weight is on the platform or when a key is
pressed.
• It will turn off automatically after a few seconds when the
weight is zero or after a while, the last key was pressed.
© Adam Equipment Company 2007
AU" Automatic control of the backlight
on" Backlight on full time
13
Advertisement
Table of Contents
