HIKVISION DS-6900UDI Series User Manual

HIKVISION DS-6900UDI Series User Manual

Ultra hd video and audio decoder
Hide thumbs Also See for DS-6900UDI Series:

Advertisement

Quick Links

DS-6900UDI(C) Series
Ultra HD Video and Audio Decoder
User Manual
0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-6900UDI Series and is the answer not in the manual?

Questions and answers

Summary of Contents for HIKVISION DS-6900UDI Series

  • Page 1 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder User Manual...
  • Page 2 Document, which may include licenses obtained from third parties. ● Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part of this Document may be excerpted, copied, translated, or modified in whole or in part by any means without written permission.
  • Page 3 INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
  • Page 4 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 5 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Applicable Models This manual is applicable to the models listed in the following table. Series Model DS-6901UDI(C) DS-6904UDI(C) DS-6908UDI(C) DS-6900UDI Decoder DS-6910UDI(C) DS-6912UDI(C) DS-6916UDI(C) About the Default Item Default Value User name admin Device IP address...
  • Page 6 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual  Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.  In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.
  • Page 7 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual  Ensure a good ventilation environment, and it is recommended to install the equipment with a ground clearance of more than 50 cm.
  • Page 8: Table Of Contents

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Contents Chapter 1 Introduction ....................... 1 1.1 Provisons ................................1 1.2 Product Introduction ............................1 1.3 Manangement Software Description ........................1 Chapter 2 Video Wall Configuration.................... 2 2.1.Web Login ................................2 2.2 Video Wall Configuration ............................
  • Page 9 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual 4.1.4 Log ................................36 4.1.5 Device Debugging ............................ 36 4.2 Security Management ............................37 4.2.1 IP Filtering Control ........................... 37 4.2.2 Certificate Management .......................... 38 4.2.3 SADP ................................. 39 4.2.4 Syslog ...............................
  • Page 10: Chapter 1 Introduction

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Chapter 1 Introduction 1.1 Provisons In order to simplify the description, the following provisions are made in this manual:  Smart Wall software are referred to as “Client Software”. ...
  • Page 11: Chapter 2 Video Wall Configuration

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Chapter 2 Video Wall Configuration You can add signal source, decode video on the video wall, manage scenes, and so on, through the web. 2.1.Web Login Enter the IP address of the decoder on the address bar of web browser, and enter the user name and password in the login page.
  • Page 12: Video Wall Configuration

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Figure 2-2 Welcome Page 2.2 Video Wall Configuration Click Video Wall Configuration to enter the corresponding page. Video Wall Configuration Click Video Wall Configuration > Edit Video Wall Dimensions in the upper-right corner of the page to set video wall dimensions (row ×...
  • Page 13: Connect With Video Wall

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Click Video Wall Configuration to drag the output channels from the left-side list to the right display screen to connect them with the video wall. If all screens of the current video wall are connected, click to cancel the connection first and then drag the output channels to connect once again.
  • Page 14 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Figure 2-6 BNC Output Port  HDMI Output Port Output Name: Customize a name. Video Format: Select the output mode of the decoder connected to the display screen, with options for HDMI and DVI. If the decoder is connected to the display screen and uses HDMI output, the output mode can be set to HDMI.
  • Page 15: Other Configurations

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Figure 2-7 HDMI Output Port  Edit Output Background Edit the output background of the single video wall. Click Output Background > in the lower right to edit the background color.
  • Page 16 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Figure 2-8 Select Solid Color Background  Unlink All Output Ports Click Unlink All Output Ports, and click Save.
  • Page 17: Network Signal Source Management

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Figure 2-9 Unlink All Output Ports  Display Output No. Click Display Output No.to display the output No.  Refresh Click Refresh to refresh the video wall configuration. 2.3 Network Signal Source Management Signal source can be added by entering IP address or URL.
  • Page 18 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual  Ordinary Network Source: Fill in the number of channels based on the number of channels in the signal source, and check the channels that need to be added. ...
  • Page 19 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Figure 2-10 Add Signal Source by IP Address Step 4 Click Save. Step 5 (Optional) Perform the following operations.  Click to modify the information like Device Name, Transmission Protocol, Group, Getting Stream via Stream Media of the Added Signal Source.
  • Page 20: Add By Ddns

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual If the network signal source has been decoded onto the video wall, editing or deleting is not supported. Step 1 Click Video Wall Operation > Signal Source > to select DDNS. Step 2 Fill in signal source information and stream media information.
  • Page 21: Add By Url

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Figure 2-11 Add Signal Source by DDNS Step 4 Click Save. Step 5 (Optional) Perform the following operations:  Click to modify the information like Device Name, Transmission Protocol, Group, Getting Stream via Stream Media of the Added Signal Source.
  • Page 22: Video Wall Operation

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Step 2 Fill in signal source information and stream media information.  Device Name: Enter a custom name.  URL: Enter signal source URL. The URL parameters are described as follows: rtsp://IP:554/h264/ch1/main/av_stream/?username=admin?password=12345678?link mode=tcp For example...
  • Page 23: Edit Decoding Window

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Click the decoding window to adjust the window position and size, and perform operations such as splitting, roaming and enlarging window. Figure 2-13 Edit Window  Split Window Click the corresponding split screen icon to perform window splitting. Figure 2-14 Split Window ...
  • Page 24 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Figure 2-16 Roam Window Figure 2-17 Enlarge Window  Batch Open Windows Directly drag the folder to the output port to batch open windows and decode to the video wall. Figure 2-18 Batch Open Window ...
  • Page 25: Signal Source Operations

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Figure 2-19 Start Signal Source Auto-Switch  Clear Window Click Clear to clear all windows of the signal source. Click the decoding window to stop/start decoding, turn on/off audio, set decoding delay, and turn on/off intelligent decoding for the signal source.
  • Page 26: Scene Management

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual rate, encoding type, packaging format, and decoded video frames. Click Show All to enter the decoding status page. Figure 2-21 Decoding Status Details Figure 2-22 Decoding Status Page No more than 64 scenes can be added for a device. Click Video Wall Operation >...
  • Page 27 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual  Save Scene: Click Save Scene to save the current video wall scheme as a new scene or overwrite the old scene. Figure 2-24 Save Scene  Call Scene: Click to call the scene.
  • Page 28: Chapter 3 General Configuration

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Chapter 3 General Configuration 3.1 System Configuration Click Configuration > System > System Settings > Basic Information. You can check the device information, such as the device name, Mac address, model, device serial No., main control version, etc.
  • Page 29 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Figure 3-2 Configure Time Settings Step 2 Select a time zone. Select a time synchronization mode and set the corresponding parameters.  Synchronize Time with NTP Server Select NTP Time Sync., enter the IP address and port No. of NTP server, and select the synchronization interval.
  • Page 30: Configure Serial Ports

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Select Manual Time Sync. and manually set the time for synchronization. You can also click Sync With Computer Time and the system time will be synchronized with the computer time. Figure 3-4 Configure Time Manually (Optional)Enable the DST function and configure the start time, end time, and bias time.
  • Page 31 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Configure RS-232 Settings  Configure RS-485 Serial Port Click Configuration > System > Serial Port Settings > Select Serial Port(s) 2 to enter the following page.
  • Page 32 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Configure RS-485 Settings  Configuring Transparent Channel Click Configuration > System > Serial Port Settings > Transparent Channel to enter the following page. Click to configure channel parameters. Figure3-8 Select the Channel...
  • Page 33: Manage Users

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Figure3-9 Configure Channel Parameters Click Configuration > System > User Management to enter the following page, which supports adding, editing, and deleting user accounts. Figure3-10 User Management  Add User Accounts Click Add to fill in the user name, admin password, password, and confirm password.
  • Page 34 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Figure 3-11 Add User Accounts  Edit User Name or Change Password Click to edit the user name or change password.
  • Page 35 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Figure 3-12 Edit User Information  Delete User Accounts Click to delete the user account and click OK. Figure 3-13 Delete User Accounts Only the admin password can be changed. The name of admin user cannot be edited and the admin user cannot be deleted.
  • Page 36: Network Configuration

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual 3.2 Network Configuration Step 1 Click Configuration > Network > Network Settings > TCP/IP to configure network parameters, such as the IPv4 address, IPv4 subnet mask, IPv4 default gateway, and the IP addresses of preferred and alternative DNS server.
  • Page 37: Configure Encoding Devices

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Figure 3-15 Configure HTTP(S) Step 2 Click Save. 3.3 Configure Encoding Devices Click Configuration > Signal Source Configuration > Encoding Configuration to set video encoding parameters such as stream type and resolution. ...
  • Page 38 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual quality is relatively low. On the contrary, the larger the fluctuation of the bit stream, the higher the image quality.  Resolution: Select according to the actual requirement for video clarity. The higher the resolution, the higher the bandwidth requirement for the network.
  • Page 39: Event Configuration

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Figure 3-17 Encoding Configuration 3.4 Event Configuration When detecting incidents such as IP address conflicts, invalid access, network disconnection, and temperature alarm, you can configure whether triggering the audible alarm and linking to report platform or not.
  • Page 40: Configure Device Exception Alarms

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual  IP Address Conflict: When the IP address of a device is the same as that of other devices in the network, an alarm will be triggered and uploaded to the platform. ...
  • Page 41: Other Settings

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Set the maximum and minimum temperature thresholds for devices when they are working normally. When the device temperature is higher than the maximum threshold or lower than the minimum threshold, an alarm will be triggered and uploaded to the platform. Figure 3-19 Configure Device Working Status Alarm 3.5 Other Settings Click Configuration >...
  • Page 42: Configure Decoding Delay

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual If you select connection exception, the concrete reason will be displayed.  Insufficient Decoding Resource Prompt: Enable the button to prompt insufficient decoding resource. Figure 3-21 Screen Display Configuration Configure the preference for real-time or fluency when decoding.
  • Page 43: Chapter 4 Maintenance And Security

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Chapter 4 Maintenance and Security 4.1 System Maintenance Click Maintenance and Security > System Maintenance > Reboot. Click Reboot to reboot the device. Click Maintenance and Security > System Maintenance > Upgrade. Click to select upgrading files.
  • Page 44 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Figure 4-2 Back Up Reset  Partial Reset All data except network parameters and user accounts will be cleared.  Factory Reset All functions and parameters will be restored to factory settings. Figure 4-3 Reset Import Parameters Import parameters that are exported from other devices to quickly use the same configuration.
  • Page 45: Log

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Figure 4-4 Import Parameters Search and export logs.  Search Logs Click Maintenance and Security > System Maintenance > Log to set search conditions. Click Search. Figure 4-5 Log ...
  • Page 46: Security Management

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Enter the Shell command, click Send and determine the abnormal situation of the device by checking for received message. Figure 4-6 Device Debugging 4.2 Security Management Configure IP addresses that are allowed or prohibited to access the device. Step 1 Click Maintenance and Security >...
  • Page 47: Certificate Management

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Step 3 Click Add to add the corresponding IP address and description. Click Save. Figure 4-7 IP Filtering Control  Modify List: Click to edit the corresponding IP address and description of the list. ...
  • Page 48: Sadp

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Once enabled, the device can be searched by SADP software on the same network. Click Maintenance and Security > Security Maintenance > SADP to enable or disable SADP. Once enabled, the device log can be uploaded to the Syslog server automatically. Step 1 Click Maintenance and Security >...
  • Page 49: Chapter 5 Device Information

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Chapter 5 Device Information 5.1 Check Device Status You can check the device health status such as firmware usage, decoding usage, network status, and partition status. Click Overview to check the resource usage and device status. Figure 5-1 Check Device Status 5.2 Screen Maintenance You can view the screen information, configure the signal source type and image parameters, and...
  • Page 50 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Figure 5-2 Screen Maintenance Page Step 2 (Optional) Perform the following operations as needed.  Display Screen Information Click Display to show the screen information such as work duration and temperature. Figure 5-3 Display Screen Information ...
  • Page 51 DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Figure 5-5 Adjust Screen Backlight  Copy to All Screens Click Copy to All Screens to copy the current screen settings to all other screens.  Start Up/Shut Down Screen Click to start up/shut down the screen.
  • Page 52: Chapter 6 More Information

    DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual Chapter 6 More Information Scan the QR code below to acquire Smart Wall Client User Manual.
  • Page 53 UD35135B...

Table of Contents