Step 4
Click OK to save the settings.
You can also modify the LED resolution by selecting the LED area and click LED Resolution
Config to input the LED Resolution in the text fields.
5.2.3
Configuring General Parameters of Video Wall
Purpose
You can configure what the screen show when decoding ends and streaming fails, enable auto-
switch of sub-stream, and set the LED window display mode on the Add/Modify Video Wall
interface.
Step 1
On the Add/Modify Video Wall interface, select the added decoder and click
General Parameters Configuration of Video Wall interface.
Step 2
Input the Transparency (0 to 100 available) to set the transparency of the video wall.
HD Video and Audio Decoder User Manual
Figure 5-16
Figure 5-17
Figure 5-18
General Parameters Configuration of Video Wall
Batch Configuration
Configure LED Resolution
55
DS-6900UDI Decoder User Manual
to enter the