HIKVISION DS-6900UDI User Manual page 89

Step 2 Check the checkbox of Enable to enable Wi-Fi.
Step 3 Input an effective SSID.
Step 4 Click WLAN Settings tab to enter the WLAN Settings interface.
Step 5 Select the NIC Type to Auto-Switch and check the checkbox of Enable DHCP. Click Save to
save the settings and the device will reboot to enter the Wi-Fi mode.
If you want to enable Wi-Fi, you must select NIC Type to Auto-Switch. In this mode, if wired
network cable is connected, wired network will be connected by priority. If wired network cable is
not connected, the configured Wi-Fi will be connected.
Step 6 After the device reboots, enter the remote Wi-Fi settings interface. Click
select a Wi-Fi from the list and click Save to enable the selected Wi-Fi.
HD Video and Audio Decoder User Manual
Figure 5-61
Figure 5-62
WLAN Settings
Select Wi-Fi
82
DS-6900UDI Decoder User Manual
to