Configuring Personalized Settings; Managing User Account - HIKVISION DS-6900UDI User Manual

Step 3 Click OK to confirm the settings.
4.1.10

Configuring Personalized Settings

Purpose
You can set the stopped decoding image and failed streaming image for the personalized
configuration.
Step 1 Click Configuration > Decoding Configuration > Personalized Configuration to enter the
personalized configuration interface.
Step 2 Select Blank Screen or Last Frame when decoding ends. If you select Blank Screen, the
screen will change blank when the decoding ends. If you select Last Frame, the screen will
show the last frame when the decoding ends.
Step 3 Select No Network Signal or Last Frame when streaming fails. If you select No Network
Signal, there shows no network signal when streaming fails. If you select Last Frame, the
screen will show the last frame when streaming fails.
Step 4 Click Save to save the settings.
4.1.11

Managing User Account

Purpose
The user accounts can be managed on this interface.
Step 1 Click Configuration > System > User Management to enter the user management interface.
HD Video and Audio Decoder User Manual
Figure 4-25 Enable Synchronous Output
Figure 4-26 Personalized Configuration
27
DS-6900UDI Decoder User Manual