How To Select Language - ABB REM 610 Operator's Manual

REM 610
3.1.8.
14
Motor Protection Relay
Operator's Manual
Change the SPA password as follows:
1. Press an arrow button to access the main menu.
2. Use the arrow buttons to select CONFIGURATION\COMMUNICATION\SPA
SETTINGS\PASSWORD SPA and press
3. Press to enter the setting mode and give the current HMI password if
required. If the default HMI password 999 is still valid, no password will be
required.
4. The first digit of the password to be edited will start to flash. Set the digit using
and .
5. Activate the next digit to be set by pressing
6. To store the new SPA password and return the display to the view mode, press
. The display will confirm the storage by once flashing "---" on the display.
Alternatively, to exit the setting mode without storing the SPA password change,
press once before confirming and the display will be returned to the view
mode.
7. Press to return the display to the idle mode.
Main Menu Group Menu
MEASUREMENTS
RECORDED DATA
SETTINGS
CONFIGURATION
CONFIGURATION
FUNCTION TEST/DI
COMMUNICATION
INFO LANGUAGE
MEMORY SETTINGS
FREQUENCY
PASSWORD HMI
Fig. 3.1.7.-1 Changing the SPA password

How to select language

REM 610 allows you to choose among several different languages. The default
language is English. For the selection of languages, see Fig. 3.1.8.-1.
Change the display language as follows:
1. Press an arrow button to access the main menu.
2. Use the arrow buttons to select CONFIGURATION\LANGUAGE and press
enter the currently valid language.
3. Press to enter the setting mode and give the password if required. The second
line will start to flash indicating that you are allowed to set the language.
4. Use or to move the cursor to the desired language.
5. Press to confirm the selection. The selected language will be shown on the
display.
6. Press to return the display to the idle mode.
.
CONFIGURATION
REAR CONNECTION
REAR PROTOCOL
REAR COM. MODULE
SPA SETTINGS
IEC103 SETTINGS
MODBUS SETTINGS
TIME
UNIT ADDRESS
TRIP CIRCUIT SUP
COUNTER
RTD INPUTS
LINE-IDLE STATE
CONNECTION TYPE
1MRS 752264-MUM
or .
Parameter Menus
CONFIGURATION
PASSWORD SPA :xxx
:xxx
:xxx
Scroll for the digit Confirm
Cancel
Set the digit
to