How To Select Language - ABB REU 610 Operator's Manual

1MRS755971
Main Menu
MEASUREMENTS
RECORDED DATA
OPERATION
SETTINGS
CONFIGURATION
INFO
Fig. 4.1.7.-1 Changing SPA password
4.1.8.
Voltage Relay
Operator's Manual - ANSI Version
6. To store the new SPA password and return the display to the view mode,
. The display confirms the storage by flashing "- - -" once on
press
the display.
Alternatively, to exit the setting mode without storing the SPA password
change, press
view mode.
7. Press to return the display to the idle mode.
Group Menu
CONFIGURATION
FUNCTION TEST/DI CONFIGURATION
COMMUNICATION
LANGUAGE
MEMORY SETTINGS
FREQUENCY
U NOMINAL
PASSWORD HMI
TIME
TRIP CIRCUIT SUP

How to select language

The relay allows you to choose among several different languages. The
default language is English.
Change the display language as follows:
1. Press an arrow button to access the main menu.
2. Use the arrow buttons to select CONFIGURATION\LANGUAGE and press
to enter the currently valid language.
3. Press to enter the setting mode and give the password if required. The
second line starts to flash indicating that you are allowed to set the
language.
4. Use or to move the cursor to the wanted language.
5. Press to confirm the selection. The selected language is shown on the
display.
6. Press to return the display to the idle mode.
By pressing before confirming the selection, the former language remains
active and the display is returned to the view mode. Pressing
the display to the idle mode.
once before confirming and the display returns to the
Parameter Menus
REAR CONNECTION
REAR PROTOCOL
REAR COM. MODULE
SPA SETTINGS
IEC103 SETTINGS
MODBUS SETTINGS
UNIT ADDRESS :000
COUNTER :000
LINE-IDLE STATE
CONNECTION TYPE
REU 610
CONFIGURATION
Scroll for the digit
Confirm
PASSWORD SPA :000
Set the digit
again returns
Cancel
A051584
19