How To Select Language - ABB REU 610 Operator's Manual

1MRS755770
Main Menu
MEASUREMENTS
RECORDED DATA
OPERATION
SETTINGS
CONFIGURATION
INFO
Fig. 4.1.7.-1 Changing SPA password
4.1.8.
Voltage Protection Relay
Operator's Manual
1. Press an arrow button to access the main menu
2. Use the arrow buttons to select CONFIGURATION\COMMUNICATION\SPA
SETTINGS\PASSWORD SPA and press
3. Press to enter the setting mode and give the current HMI password if
required. If the default password 999 is still valid, no password is required.
4. The first digit of the password to be edited starts to flash. Set the digit using
and .
5. Activate the next digit to be set by pressing
6. To store the new SPA password and return the display to the view mode, press
. The display confirms the storage by flashing "- - -" once on the display.
Alternatively, to exit the setting mode without storing the SPA password change,
press once before confirming and the display returns to the view mode.
7. Press to return the display to the idle mode.
Group Menu
CONFIGURATION
FUNCTION TEST/DI CONFIGURATION
COMMUNICATION
LANGUAGE
MEMORY SETTINGS
FREQUENCY
U NOMINAL
HMI PASSWORDS
TIME
TRIP CIRCUIT SUP
STORE COUNTER

How to select language

The relay allows you to choose among several different languages. The default
language is English.
Change the display language as follows:
1. Press an arrow button to access the main menu.
2. Use the arrow buttons to select CONFIGURATION\LANGUAGE and press
enter the currently valid language.
3. Press to enter the setting mode and give the password if required. The second
line starts to flash indicating that you are allowed to set the language.
4. Use or to move the cursor to the wanted language.
Parameter Menus
REAR CONNECTION
REAR PROTOCOL
REAR COM. MODULE
SPA SETTINGS
IEC103 SETTINGS
MODBUS SETTINGS
UNIT ADDRESS :000
COUNTER :000
LINE-IDLE STATE
CONNECTION TYPE
.
or .
CONFIGURATION
Scroll for the digit Confirm
PASSWORD SPA :000
Set the digit
REU 610 REU 610
Cancel
A051584_2
to
21