How To Use The Push-Buttons - ABB REM 610 Operator's Manual

1MRS 752264-MUM
3.1.3.
Motor Protection Relay
Operator's Manual
Push and
increase or decrease increase or decrease
Fig. 3.1.2.4.-1 Adjusting the display contrast
After power start up of the relay, the factory default value of the display contrast will
automatically be restored.

How to use the push-buttons

The HMI includes push-buttons for navigating in the menu.
Navigation push-buttons
Left Up Down Right
Fig. 3.1.3.-1 Navigation buttons
Use the navigation buttons to view, select and edit desired menu items.
• Press an arrow button to activate the main menu.
• To move between the menu levels and menu items, use the arrow buttons.
• To select the item to be edited or to store a new value, press
• To increase or decrease the activated digit, shift the activated decimal point, or to
navigate between options, use
• To cancel and return the display to the previous mode (view mode or idle mode),
press .
Table 3.1.3-1 Button navigation and editing
Desired step or operation
Step downward in the main menu or a submenu
Step upward in the main menu or a submenu
Entering a submenu from the main menu or a higher
submenu
Leaving a submenu for the main menu or a higher
submenu
Increasing a value in the setting mode
Decreasing a value in the setting mode
Moving the cursor in the setting mode
Selecting the front connection at power up
Entering or leaving the setting mode, storing a new
value
Entering the monitoring state
Adjusting the display contrast
Resetting or cancelling, leaving the setting mode
without storing a new value
Enter Clear/ Clear/
Cancel Cancel
and .
Push-button
REM 610
.
or
and
and
and or
11