Main Menu; Submenu; Hmi Password - ABB REM 610 Operator's Manual

REM 610
3.1.4.
3.1.5.
3.1.6.
12
Motor Protection Relay
Operator's Manual
Table 3.1.3-1 Button navigation and editing
Resetting latched output contacts in the idle mode
Acknowledging and resetting indications, latched output
contacts and memorized values
Resetting thermal level to 0 at power up

Main menu

The main menu contains five main groups:
• MEASUREMENTS
• RECORDED DATA
• SETTINGS
• CONFIGURATION
• INFO
MEASUREMENTS MEASUREMENTS
Fig. 3.1.4.-1 The display showing the first main menu group
• To navigate between the main menu groups, use
• To return the display to the idle mode, press
The display will be returned to the idle mode on expiration of the time out.

Submenu

The menu structure contains several subgroups. The name of the main menu group
is always shown on the first line. The second line displays either the name of the
group menu, the name of the parameter and the parameter value, or just the
parameter value, in which case it is also the name of the parameter.
MEASUREMENTS
L1 In:x.xx
Fig. 3.1.5.-1 The display showing the first submenu
• To enter a submenu, press
• To navigate between the main levels in the submenus, use
• Press to return the display to the idle mode.

HMI password

The HMI password protects all user-changeable values on the technical level from
being changed by an unauthorized person. The password function will remain
inactive until the default password has been replaced. The default HMI password is
999. You can also change the password from a remote unit via parameter V162, but
you can only read the password via the HMI.
and
.
; to exit, press .
1MRS 752264-MUM
for 5 s
and
and
.
or .