Yamaha MDX-E300 Service Manual page 42

Hide thumbs Also See for MDX-E300:
Table of Contents

Advertisement

MDX-E300
Recording/reproduction function
Load a low reflection disc and after confirming the audio output in the normal reproduction mode, execute recording/reproduction.
Does the recording function fail from the starting address?
YES
M
Is an RF waveform available at No.1 pin of IC1201 or TP1201
during reproduction after recording?
NO
M
Does the level of No.3, 26 and 39 pins of IC1401 change
between recording and reproduction?
YES
M
Is an RF pattern provided at No.50 pin of IC1201?
YES
M
Check IC1300 — 1302 and CN1300.
M
Is an output waveform available at No. 1 and 7 pins of IC4 and No. 1
and 7 pins of IC5 while recording the LINE input in the normal mode?
YES
M
Is an input waveform applied to No.3 and 5 pins of IC1701?
YES
M
Check around IC1701 and No.70 — 73 pins of IC1201.
42
NO
Check that the disc is not in the recording inhibited status.
YES
NO
Check around IC1401.
NO
Check IC1201 for proper soldering.
NO
Check around IC4 and IC5 and also check the REC
LEVEL volume.
NO
Check around IC1701 and CN1501.

Advertisement

Table of Contents
loading

Table of Contents