Yamaha MDX-E300 Service Manual page 20

Hide thumbs Also See for MDX-E300:
Table of Contents

Advertisement

MDX-E300
5. EEPROM setting mode
(used to confirm/adjust setting values)
1) Start the TEST mode.
2) Load the disc.
[AUTO AJST]
3) Press the DISPLAY button
[EEPROM SET]
4) Execute the procedure to have "EEPROM setting mode transition diagram" displayed and adjust
the jog dial so that the same setting values as those in "EEPROM contents list" are obtained.
(Refer to p.16 for TEMP setting.)
5) Press the REC/PAUSE button
(Entry into EEPROM can be started here.)
6) Set to the TEST mode again and perform AUTO preliminary adjustment, AUTO adjustment and
AUTO AFB adjustment.
EEPROM SETTING MODE TRANSITION DIAGRAM
Note)
To return to the SUB MENU or MAIN MENU display of the test mode, press the DELETE/CANCEL button.
20
Disc in use: Commercially available mini disc for recording
6 times.
(REMOCON)
to cancel the TEST mode.
(REMOCON)

Advertisement

Table of Contents
loading

Table of Contents