Firmware Update - Inspur SA5112M4 User Manual

Save & Exit Menu Interface Instruction Table
Interface Parameters
Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Save Changes
Discard Changes
Restore Defaults
Save as user Defaults
Restore user Defaults
Boot Override

8.3 Firmware Update

For BIOS update, you could select to update in DOS or OS.
1) Use Afudos tool to update BIOS in DOS. System boots from USB DOS startup disk and
enters the directory containing Afudos tool. While bin files of the corresponding new
BIOS version are put into this folder, execute command: Afudos BIOS.bin /b /p /n /x /me
to update BIOS and ME, for BIOS.bin – bin files of the new BIOS version. An example is
shown in the following figure:
Function Description
To save changes and exit
To discard changes and exit
To save changes and reset
To discard changes and reset
To save changes
To discard changes
To restore defaults
To save as user defaults
To restore user defaults
To reload boot device, you could select all boot devices in the
following.
BIOS Setup
69