Boot Menu - Inspur SA5112M4 User Manual

8.2.6 Boot Menu

Boot Configuration Menu Interface Instruction Table
Interface Parameters
Bootup NumLock State
Boot Options Retry
Quiet Boot
Boot Option Priorities
Boot Option #X
Hard Driver BBS Priorities
Network Device BBS Priorities
To Set BIOS Boot Operation:
Enter Boot menu. Move the cursor to Boot option #X via up and down keys to select. Set
system boot priorities, X is 1, 2, 3 etc. An example is shown in the following figure:
Function Description
Numlock state settings after bootup
The booting device polling settings
To boot quietly, set this option to Enabled, and boot logo displays
as that set by manufacturer, disabled, boot logo displays as AMI's
default logo.
Boot option priority settings
Hard disk device BBS priority settings
Network device BBS priority settings
BIOS Setup
67