System Board Jumper Introduction - Inspur SA5112M4 User Manual

Item

3.7 System Board Jumper Introduction

See [System Board Components] for the jumper position.
Item
CLR_CMOS
Please note the following:
Please shut down the system, as well as disconnect power supply during CMOS
cleaning, and hold for five seconds after short-circuiting Pin2-3; then short-circuit Pin1 and
Pin2 (the default status) of CLR_CMOS jumper with a jumper cap to restore original status.
14
Description
16 Internal USB 3.0 connector
17 Front VGA connector
18 IPMI management port / rear USB 3.0 connector (2)
19 Processor 1 PCIe x24 slot
20 Rear VGA connector
21 Debug LED
22 GbE port
23 ID LED and button
24 BMC reset button
25 10 GbE port
26 Processor 1 PCIe x16 slot
27 Processor 0 PCIe x8 slot
28 Processor 0 PCIe x8 (in x16 slot)
29 System board handle
30 PSU1 connector
31 PSU0 connector
32 Power connectors (4-pin)
33 Power connectors (8-pin)
34 Front control panel connector
35 LSI 3008 HD mini SAS connector
36 LSI 3008 SAS Key
Description
CMOS clear jumper
J46 Short-circuit pin1-2, restore to normal status; short-
circuit pin2-3, clear CMOS.
Function