Install The Pci Riser Cage; Remove The Air Baffle - Inspur SA5112M4 User Manual

1. Power down the server.
2. Extend the server from the rack.
3. Remove the access panel.
4. Remove the PCI riser cage.

4.7 Install the PCI Riser Cage

1. Power down the server.
2. Extend the server from the rack.
3. Remove the access panel.
4. Install the PCI riser cage.
5. Install the access panel.
6. Install the server into the rack.
7. Power up the server.

4.8 Remove the Air Baffle

CAUTION: For proper cooling do not operate the server without the access panel, air baffle,
or fan installed. If the server supports hot-plug components, minimize the amount of time
the access panel is open.
1. Power down the server.
2. Extend or remove the server from the rack.
3. Remove the access panel.
4. Remove the air baffle.
18