Endurance® Universal Adapter Accessory (E-Uaa); Adapter Kit For Endurance® In Wj-5 Water Jacket Installations (E-Ak-7); Mounting Flange (E-Mf-7); Figure 61: Endurance® Universal Adapter Accessory (E-Uaa) - Fluke endurance series User Manual

Endurance® Series
Users Manual
9.2.9. Endurance® universal adapter accessory (E-UAA)
The E-UAA clamps around the Endurance® sensor, and can be used to mount it to an
existing Modline 5 installation, where a RAM (Right Angle Mount) is used, a tripod, or any
device using a 1/4–20 UNC threaded mounting hardware. The E-UAA is not identical to the
Modline5 UAA. Once the E-UAA is fixed to the Endurance® sensor, it is compatible with all
Modline series models and allows the reuse of inherited mounting accessories.
Figure 61: Endurance® universal adapter accessory (E-UAA)
9.2.10. Adapter kit for Endurance® in WJ-5 water jacket installations (E-AK-7)
The Adapter kit is for mounting of an Endurance® sensor into an existing Ircon WJ-5 water
jacket installation. The adapter kit exist out of the mounting flange (E-MF-7), two Modline5
mounting nuts, a Modline5 fixed bracket, a Modline5 water jacket mounting bracket, and a
flange adapter to adapt the outer Endurance® mounting thread to the outer Modline5 thread
dimension.
Figure 62: Adapter kit for Endurance® in WJ-5 water jacket installations (E-AK-7)

9.2.11. Mounting flange (E-MF-7)

The E-MF-7 allows an Endurance® sensor to be mounted into an existing Ircon flange mount
installation. Please note that this accessory needs to be used in conjuction with the E-MFA-7
to adapt the outer Endurance® sensor thread to the outer Modline thread. E-MF-7 together
with E-MFA-7 are needed to mount en Endurance® sensor into an existing Ircon flange
mount installation.
66