Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.
9.3.2. Metric unit ThermoJacket housing for Endurance® sensors (E-TJ1M)
The E-TJ1M ThermoJacket type is for the usage in regions with international units system.
Please see for a detailed technical description, dimensions and drawings under chapter 9.3.1,
Imperial unit ThermoJacket housing for Endurance® sensors (E-TJ1)
9.3.3. Mounting Flange for ThermoJacket (E-MF)
The mounting flange accessory can be used independently to mount the Water Jacket to
walls, existing ports or flanges. This mounting flange has a variety of mounting holes to
accommodate various mounting configurations.
Figure 69: Mounting Flange for ThermoJacket (E-MF)
9.3.4. Adjustable mounting base for ThermoJacket (E-MB)
The adjustable mounting base provides stable, permanent placement of the ThermoJacket
while allowing the ThermoJacket to swivel 360° and pitch 90° forward.
Figure 70: Adjustable Mounting Base for ThermoJacket (E-MB)
Innovative High Temperature Infrared Pyrometers
.
71