Low Temp. Multi-Conductor Cable With M16 Connector (E-2Cltcbxx); Figure 40: High Temp. Multi-Conductor Cable With M16 Connector (E-2Ccbxx) - Fluke endurance series User Manual

Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.

Figure 40: High Temp. Multi-Conductor Cable with M16 Connector (E-2CCBxx)

9.1.2. Low Temp. Multi-conductor cable with M16 connector (E-2CLTCBxx)

Use the Low Temp. 12-wire multi conductor cable (E-2CLTCBxx) for wiring the Endurance®
sensor with the 24 VDC power supply, all inputs, outputs, and the RS485 interface. It is a
shielded 12-conductor cable, made of 2 twisted pairs plus 8 separate wires, equipped with a
M16 DIN connector on one side and wire sleeves at the counter side. The cable is PUR
(Polyurethane) coated and withstands ambient temperatures from -40 to 105°C (-40°F to
221°F). PUR coated cables are flexible and have well to excellent resistance to against oil,
bases, and acids.
Purchasable Low Temp. 12-wire multi-conductor cables lengths are 4m (13ft.), 8m (26ft.),
15m (50ft.), 30m (100ft.), 60m (200ft.), see Table 4.

Temperature:

Cable material

Cable diameter:

Conductors:
Power supply
Conductor:
Isolation:
Shield:
RS485 interface
Conductor:
Isolation:
Shield:
Outputs and Ground
Conductor:
Isolation:
Shield:
Polyurethane (Isocyanate) may cause allergy and is under a cloud to cause
cancer!
Innovative High Temperature Infrared Pyrometers
-40 to 105°C (-40°F to 221°F)
PUR- 11Y (Polyurethane), Halogen free, Silicone free
7.2 mm (0.283 in) nominal
2 wires (black/red)
0.2 mm² (AWG 24), 7x32 tinned copper
PE- 2YI1
none
2 twisted pairs (black/white and purple/gray)
0,2 mm² (AWG 24), 7x32 tinned copper
PE- 2YI1
CDV-15, 85% covered
6 wires (green/brown/blue/orange/yellow/clear)
0,2 mm² (AWG 24), 7x32 tinned copper
PE- 2YI1
none
53