I/O Device Configuration; Parameter Setting - Fluke endurance series User Manual

Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.
The diagnostics concept based on channel specific diagnostic messages, which are mapped
to the respective alarms. Coding standard is according to IEC 61158 PROFINET IO.
The Endurance® PROFINET IO module characteristics are:

Conformance class: A

Real-Time class: 1 (RT) and the Real-Time class UDP

Connection: 1 x M12

Transfer speed of up to 100Mbit/s full-duplex, also with autonegotiation

I/O update cycle time from 1 ms.

Configurable substitute value behavior in the event of error/failure

8.6.2. I/O Device Configuration

The Endurance® PROFINET takes over the task of the I/O device in PROFINET IO. Selecting
the I/O module for the process data exchange and defining the time pattern happens during
the I/O controller configuration. The configuration and parameter setting of the Endurance®
PROFINET based upon the device's GSD (Generic Station Description) file.
8.6.2.1. GSD File
Under PROFINET IO, the device manufacturer describes the device features in a GSD file,
which is XML (Extensible Markup Language) coded and supplied to the end-user.
The Endurance® PROFINET device GSD file is:
GSDML-V2.25-FlukeProcessInstruments-Endurance-20160616.xml
8.6.2.2. Configuration
The Endurance® PROFINET IO device configuration is in accordance with the physical
arrangement of the node (slot oriented).
Module slot 0 contains the Endurance® PROFINET in its function as station substitute. It
does not deliver process data itself, but provides the parameters required to perform
communication settings of the I/O device (e.g. update cycle time).
Slot 1 (Input/Output module) reflects the physical arrangement of the pyrometer, that deliver a
part of the process and diagnostics data. All specific information on the relevant module is
contained in the associated GSD file.

8.6.3. Parameter Setting

The parameter setting of a connected pyrometer happens via "record data" sets. The I/O
module allows diagnostics message to be locked or released. Once all parameter settings are
performed, the I/O device signals that it is ready to send cyclic productive data.
8.6.3.1. Pyrometer parameters
Certain pyrometer characteristics are parameterizable during the configuration. The
parameters of the pyrometer substitute are used to set the overall settings of the PROFINET
I/O node. Some of the setting are used in the module as default settings and can be optionally
overwritten within the module configuration.
Parameter
Temperature unit
Innovative High Temperature Infrared Pyrometers
Description
Set the temperature unit
Setting
Celsius
47