Fluke endurance series User Manual page 3

Warranty
The manufacturer warrants this instrument to be free from defects in material and workmanship under
normal use and service for the period of four years from date of purchase. This warranty extends only to
the original purchaser. This warranty shall not apply to fuses, batteries, or any product which has been
subject to misuse, neglect, accident, or abnormal conditions of operation.
In the event of failure of a product covered by this warranty, the manufacturer will repair the instrument
when it is returned by the purchaser, freight prepaid, to an authorized Service Facility within the
applicable warranty period, provided manufacturer's examination discloses to its satisfaction that the
product was defective. The manufacturer may, at its option, replace the product in lieu of repair. With
regard to any covered product returned within the applicable warranty period, repairs or replacement will
be made without charge and with return freight paid by the manufacturer, unless the failure was caused
by misuse, neglect, accident, or abnormal conditions of operation or storage, in which case repairs will
be billed at a reasonable cost. In such a case, an estimate will be submitted before work is started, if
requested.
THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS, OR ADEQUACY FOR ANY PARTICULAR PURPOSE OR USE. THE MANUFACTURER
SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES,
WHETHER IN CONTRACT, TORT, OR OTHERWISE.
Software Warranty
The manufacturer does not warrant that the software described herein will function properly in every
hardware and software environment. This software may not work in combination with modified or
emulated versions of Windows operating environments, memory-resident software, or on computers
with inadequate memory. The manufacturer warrants that the program disk is free from defects in
material and workmanship, assuming normal use, for a period of one year. Except for this warranty, the
manufacturer makes no warranty or representation, either expressed or implied, with respect to this
software or documentation, including its quality, performance, merchantability, or fitness for a particular
purpose. As a result, this software and documentation are licensed "as is," and the licensee (i.e., the
User) assumes the entire risk as to its quality and performance. The liability of the manufacturer under
this warranty shall be limited to the amount paid by the User. In no event shall the manufacturer be
liable for any costs including but not limited to those incurred as a result of lost profits or revenue, loss of
use of the computer software, loss of data, the cost of substitute software, claims by third parties, or for
other similar costs. The manufacturer's software and documentation are copyrighted with all rights
reserved. It is illegal to make copies for another person.
The device complies with the requirements of the European Directives.
EC – Directive 2004/108/EC (EMC)
Electromagnetic Compatibility Applies to use in Korea only. Class A Equipment
(Industrial Broadcasting & Communication Equipment)
This product meets requirements for industrial (Class A) electromagnetic wave equipment
and the seller or user should take notice of it. This equipment is intended for use in
business environments and is not to be used in homes.
Specifications subject to change without notice.