Mounting Flange For Use With Sighting Tubes (E-Mst); 30Cm (12") Sighting Tube, Ceramic Up To 1500°C/2730°F (E-Stc12); Figure 74: Adjustable Pipe Adapter (E-Apa); Figure 75: Mounting Flange For Sighting Tube (E-Mst) - Fluke endurance series User Manual

Endurance® Series
Users Manual
Mounting flange for
sighting tube (WJMFST-7)

9.3.7. Mounting flange for use with sighting tubes (E-MST)

The mounting flange (E-MST) for the use with sighting tubes is to adapt different kind of
sighting tubes to the Endurance® sensor in ThermoJacket installation. The E-MST has an
inner thread to screw in and fix a selected sighting tube.

Figure 75: Mounting Flange for Sighting Tube (E-MST)

9.3.8. 30cm (12") sighting tube, ceramic up to 1500°C/2730°F (E-STC12)
Use the E-STC12 ceramic sighting tube in conjunction with the E-MST tube-mounting flange
in temperature measurement environments where reflected energy is a problem. Fix the E-
MST mounting flange directly to the Water Jacket face. Screw the E-STC12 ceramic sighting
tube into the E-MST mounting flange.
Sighting tube specification:
 Ceramic Sighting Tube, up to 1500°C (2732°F), 305 mm (12 in.) long (E-STC12)
74

Figure 74: Adjustable Pipe Adapter (E-APA)

2x Mounting flange
(WJMF-7)