Low Temp 12-Wire Cable (E-2Cltcbxx); Table 12-3: Cable Specification; Table 12-4: Color Assignment To Din Connector; Figure 12-2: 12-Wire Cable, Low Temp Version - Fluke Endurance Series User Manual

12.1.2 Low Temp 12-Wire Cable (E-2CLTCBxx)

Use the Low Temp 12-wire cable for the sensor to support power supply, all inputs, outputs, and the RS485
interface. The cable described below is a shielded 12-conductor cable, made of two twisted pairs plus 8 separate
wires, all as tinned copper braid. The cable is equipped with a M16 DIN connector on one side and wire sleeves
at the counter side. The outer diameter of the cable is 7.2 mm (0.28 in).
The cable withstands ambient temperatures up to 105°C (221°F) and is PUR (Polyurethane PUR- 11Y, Halogen
free, Silicone free) coated. PUR coated cables are flexible and have good to excellent resistance to against oil,
bases, and acids.
Color
black/red
black/white
purple/gray
green/brown/blue/orange/yellow/clear

Figure 12-2: 12-Wire Cable, Low Temp Version

Table 12-3: Cable Specification

P/N Ambient Temperature
E-2CLTCB4 -40 to 105°C (-40 to 221°F)
E-2CLTCB08 -40 to 105°C (-40 to 221°F)
E-2CLTCB15 -40 to 105°C (-40 to 221°F)
E-2CLTCB30 -40 to 105°C (-40 to 221°F)
E-2CLTCB60 -40 to 105°C (-40 to 221°F)
Number
2 wires
1 twisted pair
1 twisted pair
6 wires

Table 12-4: Color Assignment to DIN Connector

Color Connector Pin
Black A
White B
Gray C
Purple D
White/drain E
Yellow F
Orange G
Blue H
Green J
Brown K
Black L
Red M
Length
4 m (13 ft)
8 m (26 ft)
15 m (49 ft)
30 m (98 ft)
60 m (197 ft)
Cross Section Shield
0.33 mm² (AWG 22) none
0.22 mm² (AWG 24) yes
0.22 mm² (AWG 24) yes
0.22 mm² (AWG 24) none
Description
RS485-A
RS485-B
- mA In
+ mA In
Shield
Trigger
Relay (alarm)
Relay (alarm)
+ mA Out
- mA Out
Ground (power)
+ 24 VDC
Accessories 12
Electrical Accessories
85