Appendix A-Hyper Terminal; Appendix B-Power Device Network Utility; Overview; Installation - CyberPower PDU81001 User Manual

Appendix A-Hyper Terminal

Hyper Terminal software can be used for basic PDU configuration.
In order for Hyper Terminal to interact with the PDU, the PC/server
must be connected directly to the PDU via the serial port with the
included RJ45/DB9 serial port connection cable. It utilizes a text-
based interface and menu system. Navigation through the interface
is done by typing the number of the menu option and pressing the
Enter key. Setup the COM port settings using the following values.
* Bits per second: 9600
* Data bits: 8
* Parity: None
* Stop bits: 1
* Flow control: None
Note: The session will timeout and logout after 3 minutes of
inactivity. Menu options are shown below:
[Main Menu]
1. Outlet Manager (Switched PDU Series Only)
2. Network Settings
3. System Configuration
4. Account Settings
5. Configure System to Default
6. Logout
[Outlet Manager]
1. Outlet Control
2. Outlet Configuration
[Network Setting]
Physical MAC Address: 00-0C-15-40-08-A9
1. System IP: 192.168.24.20
2. Subnet Mask: 255.255.255.0
3. Default Gateway: 192.168.24.254
4. DHCP: Enabled
5. Http Port: 80
6. Http Access: Enabled
[System Configuration]
1. Date (mm/dd/yyyy) : 11/11/2011
2. Time (hh:mm:ss): 17:17:25
3. Name:PDU20SW8FNET
4. Contact: Administrator
5. Location: Server Room
[Account Setting]
1. Administrator
2. Viewer (Web Only)
[Configure System to Default]
Sure to Configure System to Default
1. Yes
2. No

Appendix B-Power Device Network Utility

Overview

The CyberPower Power Device Network Utility is an easy-to-use
interface which is used for establishing IP addresses on CyberPower
PDU devices.

Installation

Step 1. Download the Power Device Network Utility software from
www.cyberpower.com.
Step 2. Select Next in the software wizard (Shown in Figure 1).
Figure 1
30