Chapter 2 Instrument Setups - Tenma 72-8710 Operating Manual

Chapter 2 Instrument Setups

You should be familiar with basic operation of the vertical controls,
horizontal controls and trigger system menu of your DSO Series
oscilloscope by now. After reading the last chapter, you should be
able to use the menus to set up your digital storage oscilloscope. If
you are still unfamiliar with these basic operation steps and methods,
please read Chapter 1.
This chapter will guide you through the following :
n Setting the vertical system ([CH1], [CH2], [MATH],
[VERTICAL POSITION], [VERTICAL SCALE])
n Setting the horizontal system ([HORI MENU],
[HORIZONTAL POSITION], [HORIZONTAL SCALE])
n Setting the Trigger system ([TRIGGER LEVEL], [TRIG MENU],
[FORCE])
n Setting the sampling method ([ACQUIRE])
n Setting the display mode ([DISPLAY])
n Storage and recall ([STORAGE])
24
n Setting the help system ([UTILITY])
n Automatic measurement ([MEASURE])
n Cursor measurement ([CURSOR])
n Using the execution buttons ([AUTO], [RUN/STOP])
It is recommended that you read this chapter carefully to understand
the various measurement functions and system operation steps of your
DSO Series oscilloscope.
DSO Series User Ma nual