Machine Configuration - Pfaff 8310-041 Instruction Manual

Adjustment
Control panel settings
This function is used to call up a menu for changing the display contrast and for switching
the key tone on or off, see Chapter 9.04 Setting the control panel.
13 Machine configuration
.10.01
With the machine configuration function the machine control unit receives the necessary in-
formation about the attached components. If the machine components are changed, care
must be taken to make the appropriate adjustment in the machine configuration.
●
●
●
Explanation of the functions
Input mode
This function is used to change to the initial state of the input mode.
Service menu
This function is used to call up the service menu again.
Sealing mode
This function is used to change to the sealing mode.
Top/bottom feed roller diameter
These functions are used to enter the diameter of the feed rollers installed.
Top/bottom gear mechanism
25
These functions are used to call up the menu for entering the appropriate gear data.
16
Esc
The input is interrupted and the machine moves back to the initial state of the programming
function.
Enter
All program changes are stored under the current program number.
74
Switch on the machine and call up the input mode.
Call up the service menu.
Call up the menu for entering the machine configuration.