Creating/Processing Sequences - Pfaff 8310-041 Instruction Manual

Sealing
Stop
(This function appears during the heat-sealing operation.)
This function is used to stop the heat-sealing operation, analog to pedal function "-1", also
see Chapter 7.03 Pedal.
10

Creating/processing sequences

.07
In sequences up to 8 sealing programs are combined in any order whatever and filed un-
der a sequence number. A total of up to 10 sequence programs can be filed in the machine's
memory.
●
●
●
●
●
●
●
48
To enter sequence programming, first of all call up the Program selection function.
Call up the Sequence Selection function.
Select the desired sequence number on the number block.
Call up sequence programming.
Compile a sequence from the existing individual programs by entering the program num-
bers on the number block.
The cursor in the window shows which program is being deleted or at which point a new
program is being inserted. The cursor can be moved with the arrow keys.
Insert the program (INS) at the current cursor position or delete (DEL) a marked program
from the sequence, as required.
Conclude sequence programming.