Pfaff 8310-041 Instruction Manual page 28

Preparation
Description of further functions
Clear
When this function key is pressed, the value is set at "0".
Arrow keys
When these function keys are pressed, the value is increased or reduced.
Esc
When this function key is pressed, the input is cancelled without the value entered being ta-
ken over.
Further parameters
This function opens a menu for entering the brake and acceleration profile and for setting the
start delay, see Chapter 10.03.05 Entering further sealing parameters.
Entering the values in dynamic sealing
●
●
●
●
●
●
●
●
●
28
Call up the number block for entering the bottom value for the sealing speed.
Enter the desired value on the number block.
Conclude the input, permissible values will be taken over.
Call up the number block for entering the top value for the sealing speed.
Enter the desired value on the number block.
Conclude the input, permissible values will be taken over.
If necessary, call up the number block for entering the speed difference between the top
and bottom roller.
Enter the value for the speed difference within the permissible range on the number
block.
The speed difference results from the change in speed of the top roller, which turns eit-
her more quickly or more slowly than the bottom roller. The value for the speed difference
depends on the material and the application.
Conclude the input for the speed difference, permissible values will be taken over.