Program Management - Pfaff 8310-041 Instruction Manual

Feed rollers forwards
This function makes it possible to turn the feed rollers forwards at a freely selectable speed.
For this purpose a menu is opened with functions for selecting the speed of the feed rollers
and for starting or stopping the feed rollers.
Turn rollers
This function opens the menu for turning the rollers, see Chapter 10.10Turning the rollers.
Blocking the rollers
This function is used to block the rollers, in order to facilitate a roller change. A menu is ope-
ned with a function for releasing the blocking function again.
11

Program management

.02
The program management function is used to manage sealing programs as well as configu-
ration and machine data. Files can be selected from the machine memory or from a disk and
be copied or deleted.
Switch on the machine.
●
Call up the input mode.
●
Call up the program management function.
●
Both data carriers with the corresponding files appear on the display:
- Machine memory ("C:\DATEN\") is currently selected
- Disk ("A:\) is not inserted at present (NO DISK)
The data carrier is selected by touching the appropriate box. The content of the appropriate
data carrier is also updated. The selected data carrier and the selected files are shown as in-
verse symbols:
Sealing programs are filed at a different level to that for the configuration and
machine data, in order to avoid the configuration and machine data being pro-
cessed by mistake.
Input
53