Programmed Sealing With Sequences - Pfaff 8310-041 Instruction Manual

Sealing
10

Programmed sealing with sequences

.08
In the headline, in addition to the sequence number of the selected sequence, the num-
ber of zones, the current zone and the comment for the current program are displayed. For
the current zone all heat-sealing parameters are displayed. The heat-sealing parameters have
been stipulated during programming and cannot be processed without changing the pro-
gram. In addition, in the case of sealing with sequence programs, the individual programs
belonging to the sequence are displayed, and the current program is shown here as an inver-
se symbol.
Select the desired sequence, see Chapter 9.02 Selecting a program.
●
Description of the functions
Program selection
The function opens the menu for entering the program number or for choosing the
production type, see Chapter 9.02 Selecting a program.
Notepad
This function opens the notepad with program details about the heat-sealing tools to be
used.
Sealing program
Press this function to select the appropriate sealing program.
Basting
This function opens a menu for entering the sealing parameters for basting, see Chapter
10.04 Basting.
Start
(This function appears, when the top feed roller is lowered.)
This function is used to call up the sealing start, analog to pedal function "+2", also see
Chapter 7.03 Pedal.
Feed roller up/down
This function is use to raise or lower the top feed roller, depending on its position, analog to
the pedal functions "-1" and "+1", also see Chapter 7.03 Pedal.
Turn rollers
This function opens the menu for turning the rollers, see Chapter 10.10Turning the rollers.
49