Manual Sealing - Pfaff 8310-041 Instruction Manual

Sealing
10

Manual sealing

.02
In the manual sealing mode, all relevant parameters for the sealing operation can be entered
or altered directly, see Chapter 9.03 Entering the sealing parameters.
●
Description of the functions
Selecting a program
This function opens the menu for entering the program number or for selecting the produc-
tion type, see Chapter 9.02 Selecting a program.
Sealing power
These functions are used for altering the sealing power, see Chapter 9.03.01 Entering the
sealing power or the sealing amplitude
Sealing amplitude
These functions are used for altering the sealing amplitude, see Chapter 9.03.01 Entering
the sealing power or the sealing amplitude
Sealing speed
These functions are used to alter the feed stroke or to open the menu for entering the feed
stroke difference, the brake and acceleration profiles and the start delay for the rollers, see
Chapter 9.03.02 Entering the sealing speed
Basting
This function opens a menu for entering the sealing parameters for basting, see Chapter
10.04 Basting.
Left secondary roller
This function is used to switch the left secondary roller on or off.
Right secondary roller
This function is used to switch the right secondary roller on or off.
Roller pressure
These functions are used to alter the roller pressure, see Chapter 9.03.03 Entering the rol-
ler pressure.
32
Select Manual Sealing, see Chapter 9.02 Selecting a program
Power sealing (standard) Amplitude sealing