Table of Contents
Advertisement
11
Seam program input with the "Creating/adjusting a program" function
.01.02
With this function the seam program is entered by entering or changing the appropriate
values on the control panel. This type of seam program input is particularly suitable for
adjusting existing seam programs.
● Switch on the machine.
● Call up the input mode.
● Call up the "creating/adjusting a program" function.
● Carry out the basic settings and conclude with the "Enter" function, see Chapter 11.01.01
Basic settings for seam program input.
● Alter the actual and required length of the seam, see Chapter 11.01.03 Entering the
actual and the required length of the seam section.
● Alter the fullness, see Chapter 9.05 Inputting fullness.
● Alter the maximum speed for the current seam section.
● These functions are used to scroll through the current seam program.
The current seam section is displayed accordingly, in addition to all the other current
values.
● Enter the functions for the end of the seam section, see Chapter 11.01.05 Entering
the end of the seam section when programming the seam.
● Select a seam type.
It is only possible to select the right or left seam, if the seam type "right and left seam"
was selected in the basic setting, see Chapter 11.01.01 Basic settings for seam pro-
gram input.
Input
11 - 4
Advertisement
Table of Contents
