Sound Devices 664 User Manual page 168

User Guide
o
ption
Q-Factor
LF Freq
HF Freq
LF Filter Type
HF Filter Type
EQ Routing
168
D
escription
Set to one of four values: 0.707, 1.0, 1.414, 2.0. This affects all EQ
bands.
For more information, see
Values range from 60 Hz to 300 Hz. Default is 100 Hz. This may be
adjusted individually for each channel.
Values range from 8 kHz to 16 kHz. Default is 10 kHz. This may be
adjusted individually for each channel.
For more information, see
Set to either Peaking or Shelving. This may be adjusted individually
for each channel.
Set to either Peaking or Shelving. This may be adjusted individually
for each channel.
For more information, see
Set to either Pre-fade or Post-fade. This affects all input channels.
For more information, see
Setting the Q-Factor.
Setting LF and HF Frequency
Setting LF and HF Filter
Setting EQ Routing.
Defaults.
Types.