Call Forwarding; Active Call Forwarding Indication - Siemens OpenStage 60T User Manual

Step by Step

Call forwarding

You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(An external destination requires special configuration
in the system.)
Select your preferred method:
„Call forwarding key" ! Seite 80
•
• „Activating call forwarding via the Program/Service
menu" ! Seite 83
You can program additional call forwarding instructions
via the Program/Service menu, „Using system forward-
ing instructions" ! Seite 85.
When call forwarding is active, a special dial tone
sounds when you lift the handset.
If DID DTMF is active (contact your service per-
sonnel), you can also forward calls to this desti-
nation.
The call forwarding key flashes if you are a call
forwarding destination ! page 18.

Active call forwarding indication

An active call forwarding instruction is indicated on the
display when your phone is idle ! page 28:
r
The LED lights up.
The call forwarding icon, the station number and, where
applicable, the name of the forwarding destination are
displayed on the first line below the status bar.
The name of the party is used if stored in the phone-
book.
220870 Dalai Lama
If call forwarding is activated for internal or external
calls, the number is preceded by the abbreviation "INT"
or "EXT".
INT Dalai, Lama
Call forwarding
79