Enhanced phone functions
Step by Step
Calls
g
Trunk flash
76
Sending a trunk flash (not for HiPath 500)
To activate ISDN-type services and features through the
network carrier's analog trunks or those of other com-
munications platforms (such as "consultation hold"), you
must send a signal to the trunks before dialing the ser-
vice code or telephone number.
Prerequisite: You have set up an external connection.
v
Open the Program/Service menu ! page 40.
Select and confirm the option shown.
Select and confirm the option shown
j
Enter the service code and/or telephone number.
[1] „Differing display view in a HiPath 4000 environment (not for
!
HiPath 500)"
Seite 185
[1]
.