Switching To Speakerphone Mode; Switching To The Handset - Siemens OpenStage 60T User Manual

Step by Step
if nec.
if nec.

Switching to speakerphone mode

People present in the room can participate in your call.
Prerequisite: You are conducting a call via the handset.
n]
Hold down the key and replace the handset. Then re-
lease the key and proceed with your call.
X
Set the call volume.
U.S. mode
If your communication system is set to US mode (con-
tact your service personnel), you do not have to hold
down the speaker key when replacing the handset
when switching to speakerphone mode.
n
Press the key shown.
]
Replace the handset. Proceed with your call.
X
Set the call volume.

Switching to the handset

Prerequisite: You are conducting a call in speaker-
phone mode.
^
Lift the handset.
n
The LED key goes out.
Basic functions
45