Data Backup To Usb Memory Stick - Siemens OpenStage 60T User Manual

Data backup to USB memory stick

Step by Step
Backup/Restore
180
Data backup to
USB memory stick
You can save your OpenStage 60/80 T user settings and
personal phonebook entries as files on a
USB memory stick and download (restore) all or, where ap-
plicable, selected data to your or another OpenStage 60/
80 T.
Every backup is given a separate name and is pass-
word-protected. The content of the backup is encrypted
by entering the password. The data can be restored
again only by entering the password entered previously.
Backup scope
• Entries and referenced data (e.g. image) from the
personal phonebook ! page 35
Call list entries ! page 37
•
User menu settings ! page 40
•
Screensaver ! page 153
•
• Photos
• Ring tones
• Call forwarding instructions with default destina-
tions ! page 79
The settings must be enabled for your phone.
Connecting a USB memory stick
Use a USB extension cable to connect the
USB memory stick to the USB master port on the un-
derside of the phone ! page 15. The following mes-
sage appears briefly.
The phone returns to idle mode after a few seconds and
you can start to back up/restore your data ! page 181,
! page 182.
The following steps are only necessary if you respond
to the pop-up menu before the automatic timeout.
Confirm the option shown.
j
if nec.
Enter and confirm the user password.
You can remove the USB memory stick by simply pull-
ing it out.
New USB detected