Call Forwarding; Using Variable Call Forwarding - Siemens HiPath 2000 Operating Instructions Manual

Making Calls – Basic Functions
Step by Step
e
or
16

Call Forwarding

Using Variable Call Forwarding

You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system).
n
Lift the handset.
qe
Enter the code.
f g
or Enter the line type you wish to use: 1 = all calls,
2 = external calls only, 3 = internal calls only
o w
Enter the destination number (without the external code).
Deactivating call forwarding:
n
Lift the handset.
re w
Enter the code.
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work) ! Page 58!
When call forwarding is active, a special dial tone
sounds when you lift the handset.
If DID DTMF is active (contact the service per-
sonnel), you can also forward calls to this desti-
nation. Destinations: fax = 870, DID = 871,
fax DID = 872.