Activating/Deactivating The Ringer; Adjusting The Volume During A Call; En-Bloc Dialing - Siemens OpenStage 60T User Manual

Individual phone configuration
Step by Step
User
Configuration
Outgoing calls
Deactivated
g
Activated g
Save & exit
Save
164

Activating/deactivating the ringer

You can see whether the function is activated or deacti-
vated from the corresponding icon in the status bar on
the display ! page 25.
*
Hold down the key shown.

Adjusting the volume during a call

[
You are conducting a call.
X
Set the volume using the TouchSlider ! page 18.

En-bloc dialing

This function is not supported by HiPath 3000.
If "en-bloc dialing" is activated, you can delete charac-
ters with the return key and re-enter them when enter-
ing a number. The connection is only set up when you
have confirmed "Dial".
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the "en-bloc dialing" entry.
The current setting is shown on the display.
Select and confirm the option shown in the context
menu.
Select and confirm the option shown.
h
or
Press the key shown.
Confirm the option shown.