Transferring Calls Directly To The Executive Phone - Siemens OpenStage 60T User Manual

Step by Step
Ring Transfer: On
Ring Transfer: Off
Making calls in the team/executive/secretary configuration
Transferring calls directly to the
executive phone
Normally, all calls for the executive are audibly signaled
only by the secretary phone.
You can set audible signaling so calls are signaled only
by the executive phone or by a second phone assigned
to it.
Prerequisite: On your phone there is a sensor key pro-
grammed with the function "Ring Transfer". The default
label is "Ring xfer".
This function is only available for the executive/
secretary configuration.
Activating
S
Press the "Ring xfer" key. The LED lights up.
or
v
Open the Program/Service menu ! page 40.
Select and confirm the option shown.
S
Press the required trunk key.
or
j
Enter the required trunk number.
Deactivating
R
Press the "Ring xfer" key. The LED goes out.
or
v
Open the Program/Service menu ! page 40.
Select and confirm the option shown.
S
Press the required trunk key.
or
j
Enter the required trunk number.
141